Skip to main content
Moving from .222 Re...
 
Notifications
Clear all

Moving from .222 Rem to a Custom Benchrest Build (6mm PPC vs 6mm BR) Rifle - Newbie question

5 Posts
3 Users
3 Reactions
377 Views
Posts: 4
Topic starter
(@bnr34)
Active Member
Joined: 2 months ago

 

Hi all,

 

I have been target shooting at 100m and 200m with a .222 Remington. While it’s plenty accurate, I’m ready to take the leap into a dedicated custom benchrest build. My goal is maximum small-group potential, but I dont need to be competitive.

I’d appreciate your insights on a few build specifics:

 

1. 6mm PPC vs. 6mm BR: Given that I want to avoid fire-forming and prefer buying high-quality factory brass (like Lapua/Alpha), is 6mm BR the logical choice here? Or is the PPC worth the extra brass prep steps even for casual benchrest?

 

2. 6mm PPC Factory Brass: If I did choose 6mm PPC, is factory Norma brass up to task, or is fire-forming Lapua .220 Russian still the only real way to go?

 

3. Neck Turning: Can I get away with a "No-Turn" chamber (.272" neck) for 6mm BR and still see top-tier accuracy at 100m/200m? 

 

4. Twist Rate & Bullets: For a 6mm BR dedicated to 100m/200m with <70gr flat-base projectiles, is a 1:13.5" or 1:14" twist still the ideal setup? Or would a faster 1:8" twist be worth considering for flexibility with heavier bullets later on?

 

5. Gunsmith Recommendations: I am based in NSW, but happy to send work interstate for a smith with proven benchrest chambering experience. 

 

Thanks in advance for the guidance!

 


4 Replies
Posts: 3
(@dazza)
New Member
Joined: 2 years ago

Hi,

 

Give me a call on 0439420635 if you like and I'll try my best to answer all the above and any other questions you might have. Darren


Reply
Posts: 4
Topic starter
(@bnr34)
Active Member
Joined: 2 months ago

Thanks Darren. I will definitely take you up on that very kind offer


Reply
Posts: 65
(@les-fraser)
Estimable Member
Joined: 2 years ago

Hi Mate i am sure Darren put you on the right path with suggestions, for what it is worth if you are going to search for top tier accuracy you can't go past  the 6PPC with a 13.5 twist barrel in LV class weight (Allows you to shoot LV and HV). If you are seeking to shoot both short range and some fly matches then there is the option of the 6mm Grinch a 6.5 Grendel case necked down to 6mm. Then you only have to swap barrels - 13.5 twist up to 68grn projectiles (3400fps) and a 1.8 Twist barrel for 100- 105 grain projectiles (2900fps) The 6BR case has been used in short range however recoil and excessive movement under recoil is a factor in accurate shooting. 

hope this helps. 

Cheers Les 


Reply
Posts: 4
Topic starter
(@bnr34)
Active Member
Joined: 2 months ago

Thanks very much. I am leaning towards a 6mm ppc. I just need to either find a used one or find someone to build me one now.


Reply
Share: